The straight-line distance is the shortest path over the Earth's surface (great-circle distance), computed on the WGS84 ellipsoid with the Vincenty formula (accurate to the millimetre). With several stops, each leg is measured and added up. On the map it is the red line.
The road distance and driving time come from a routing engine over OpenStreetMap roads (blue line), passing through the stops in order. Real travel time depends on traffic, stops and road works.
This free distance calculator finds the distance between any two places – cities, addresses, villages or GPS coordinates. You get the straight-line distance (as the crow flies), the driving distance and travel time by car, bike or on foot, and an estimate of the flight time.
Distance is the amount of space between two points, measured as a length. In everyday use it answers the question “how far apart are these two places?”. On a map the two points are places – a city, an address or a pair of GPS coordinates – and the measurement is given in kilometres (km), miles (mi) or nautical miles (NM). Distance is always zero or positive and does not depend on direction: the distance from A to B is the same as from B to A, although the road route back can differ because of one-way streets.
Two kinds of distance matter when you travel. The straight-line distance (also called the great-circle distance or distance as the crow flies) is the shortest path over the surface of the Earth. The road distance is the length of the actual route a car follows, and it is almost always longer – often 20–40% longer in hilly or mountainous regions.
You can also click directly on the map to place a point, drag the markers to adjust them, or use distance from my location to start from where you are now. Every search can be shared as a link that reopens the same points.
Besides the straight line, every route shows the driving distance and driving time, and the time on foot and by bike. Add stops to plan a trip with several addresses, see the fuel cost, and open step-by-step directions. It works like measuring distance on Google Maps, but you get the straight-line and road distance in km and miles at once, without signing in.
On a flat plane the distance between two points is found with the distance formula, which comes from the Pythagorean theorem: d = √((x₂ − x₁)² + (y₂ − y₁)²) – try it with the distance formula calculator, which also gives the midpoint. The Earth, however, is round, so maps need a formula that follows its curved surface. A simple approach is the haversine formula on a sphere; this calculator uses the more precise Vincenty formula on the WGS84 ellipsoid – the same model GPS uses – which is accurate to well under a metre. The road distance is not calculated with a formula: a routing engine searches the real road network for the fastest route and adds up the length of every road segment.
For other measurements on the map, use the area calculator to measure the surface and perimeter of a field, the coordinates finder to get the latitude and longitude of any address, and the coordinate converter to switch between decimal degrees, DMS and UTM.
Depending on the context, distance can be called length, span, range, gap, interval, mileage or reach. In navigation you will also see “leg” for one part of a route and “bearing” or “heading” for its direction.
Distance is the amount of space between two points or places, measured as a length in metres, kilometres or miles.
Type both addresses above, pick them from the suggestions and press Calculate – you get the straight-line and the road distance with the driving time.
It is measured on the WGS84 ellipsoid with the Vincenty formula, accurate to the metre – the shortest path over the Earth's surface.
From a routing engine (OSRM) over OpenStreetMap roads. Real travel time also depends on traffic and stops.
Yes – add up to 10 stops; the road route passes through them in order and every leg is shown in a table.
Yes, the calculator is free and works on phones, tablets and computers without an account.
Acest calculator de distanță gratuit află distanța dintre oricare două locuri – orașe, adrese, sate sau coordonate GPS. Primești distanța în linie dreaptă (zbor de pasăre), distanța pe drum și timpul cu mașina, bicicleta sau pe jos, plus o estimare a duratei zborului.
Toate distanțele între orașe →
Distanța este spațiul dintre două puncte, măsurat ca o lungime. În viața de zi cu zi răspunde la întrebarea „cât de departe sunt aceste două locuri?”. Pe hartă cele două puncte sunt locuri – un oraș, o adresă sau o pereche de coordonate GPS – iar măsurarea se face în kilometri (km), mile (mi) sau mile marine (NM). Distanța este întotdeauna zero sau pozitivă și nu depinde de sens: de la A la B este la fel de departe ca de la B la A, deși traseul rutier la întoarcere poate fi diferit din cauza străzilor cu sens unic.
Când călătorești contează două feluri de distanță. Distanța în linie dreaptă (numită și distanța ortodromică sau „zbor de pasăre”) este cel mai scurt drum pe suprafața Pământului. Distanța pe drum este lungimea traseului real urmat de mașină și este aproape mereu mai mare – adesea cu 20–40% în zonele de deal sau de munte.
Poți să dai click direct pe hartă pentru a pune un punct, să tragi marcajele pentru ajustare sau să folosești distanța de la locația mea pentru a porni de unde ești acum. Orice căutare se poate distribui ca link care redeschide aceleași puncte.
Pe lângă linia dreaptă, fiecare traseu arată distanța și timpul cu mașina, plus timpul pe jos și cu bicicleta. Adaugă opriri ca să planifici un drum cu mai multe adrese, vezi costul carburantului și deschide indicațiile pas cu pas. Funcționează ca măsurarea distanței pe Google Maps, dar primești deodată distanța în linie dreaptă și pe drum, în km și mile, fără cont.
Pe un plan, distanța dintre două puncte se află cu formula distanței, care vine din teorema lui Pitagora: d = √((x₂ − x₁)² + (y₂ − y₁)²) – încearc-o cu calculatorul formulei distanței, care dă și mijlocul segmentului. Pământul însă este rotund, așa că hărțile au nevoie de o formulă care urmează suprafața curbă. O metodă simplă este formula haversine pe sferă; acest calculator folosește formula Vincenty, mai precisă, pe elipsoidul WGS84 – același model folosit de GPS – cu o precizie mult sub un metru. Distanța pe drum nu se calculează cu o formulă: un motor de rutare caută în rețeaua reală de drumuri cel mai rapid traseu și adună lungimea fiecărui segment de drum.
Pentru alte măsurători pe hartă folosește calculatorul de suprafață pentru suprafața și perimetrul unui teren, aflarea coordonatelor pentru latitudinea și longitudinea oricărei adrese și convertorul de coordonate pentru grade zecimale, DMS și UTM.
În funcție de context, distanța se mai numește lungime, depărtare, întindere, interval, spațiu, kilometraj sau rază. În navigație vei întâlni și „segment” pentru o parte a traseului și „azimut” sau „direcție” pentru orientarea lui.
Distanța este spațiul dintre două puncte sau locuri, măsurat ca lungime în metri, kilometri sau mile.
Scrie ambele adrese mai sus, alege-le din sugestii și apasă Calculează – primești distanța în linie dreaptă și pe drum, cu timpul de condus.
Se măsoară pe elipsoidul WGS84 cu formula Vincenty, cu precizie de metru – cel mai scurt drum pe suprafața Pământului.
De la un motor de rutare (OSRM) pe drumurile din OpenStreetMap. Timpul real depinde și de trafic și opriri.
Da – adaugi până la 10 opriri; traseul rutier trece prin ele în ordine și fiecare segment apare într-un tabel.
Da, calculatorul este gratuit și merge pe telefon, tabletă și calculator, fără cont.