Distance from Shenzhen to Săcele
Straight line
By road
Travel time
Direction
Open in the calculator (stops, directions, fuel cost) → Săcele → Shenzhen
How far is Shenzhen from Săcele?
Shenzhen (China) and Săcele (Romania) are very far apart: 8,130 km in a straight line, that is 5,052 miles or 4,390 nautical miles. The distance is measured over the Earth's surface (WGS84 ellipsoid) along the shortest possible path.
By road, Shenzhen to Săcele is 10,456 km (6,497 miles), about 129 h 40 min by car on the fastest route, without traffic or stops. The road is 29% longer than the straight line.
From Shenzhen, Săcele lies to the north-west (initial bearing 313°). The route crosses from China into Romania. The halfway point is at 43.0763°, 77.5322°.
A direct flight would take about 10 h 40 min (800 km/h cruise plus take-off and landing). The road distance and driving time are calculated on the map from OpenStreetMap roads.
Other distances from Shenzhen
- Shenzhen – Kowloon 28 km
- Shenzhen – Hong Kong 32 km
- Shenzhen – Dongguan 62 km
- Shenzhen – Guangzhou 105 km
- Shenzhen – Foshan 110 km
- Shenzhen – Yunfu 212 km
- Shenzhen – Jieyang 260 km
- Shenzhen – Shantou 286 km
- Shenzhen – Zhongshan 385 km
Other distances from Săcele
- Săcele – Brașov 9 km
- Săcele – Râșnov 21 km
- Săcele – Codlea 22 km
- Săcele – Sfântu Gheorghe 28 km
- Săcele – Zărnești 31 km
- Săcele – Sinaia 32 km
- Săcele – Comarnic 41 km
- Săcele – Covasna 45 km
- Săcele – Breaza 48 km
Frequently asked questions
How far is Shenzhen from Săcele?
By road it is 10,456 km (6,497 miles) from Shenzhen to Săcele; in a straight line it is 8,130 km (5,052 miles).
How long is the drive from Shenzhen to Săcele?
About 129 h 40 min on the fastest route (10,456 km), without traffic or stops.
In which direction is Săcele from Shenzhen?
Săcele is to the north-west of Shenzhen, at an initial bearing of 313°.
How long is the flight from Shenzhen to Săcele?
A direct flight would take about 10 h 40 min at an average cruising speed of 800 km/h.
How is the distance calculated?
The straight-line distance is computed on the WGS84 ellipsoid with the Vincenty formula, accurate to the metre. The road distance comes from OpenStreetMap roads.